The KGC-1 converts a 240 VAC sensing transfer switch into a 2-Wire Start Transfer Switch. The interface provides the necessary voltage sensing, timing functions and switching circuits required for automatic operation. This allows a 2-Wire Start Generator to be installed without having to change the transfer switch or wiring between the transfer switch and generator.
HOW PSP KGC-1 WORKS:
When utility power fail, the KGC-1 will pause for 5 seconds to ensure an actual power outage has occurred. The KGC-1 will the initiate a 2-wire generator start signal, starting up the generator. After a 15 second warm-up period he KGC-1 will confirm the generator voltage is within acceptable levels and will then output the generator transfer signal.
When utility power is restored and remains stable for more than 2 minutes the controller will automatically transfer the load back to utility and signal the generator to turn off after cool down period.
